Back to Blog
How-to Guides 2026-11-20 SumLilThings - Home to the Lil' Misfits 0 views

Acrylic Mini CD Keychain: Storing and Swapping the Disc

Acrylic Mini CD Keychain: Storing and Swapping the Disc

Learn how to store and swap the removable disc on your Acrylic Mini CD Keychain, plus tips for using it as a washi card and cutter.

What You Get with the Acrylic Mini CD Keychain

The Acrylic Mini CD Keychain & Washi Card is part of the Lil' 90s Nostalgia collection. It's made of three pieces of acrylic: an outer case about 3 inches across, and a removable disc inside that can spin. The disc is single-sided print acrylic with a holographic overlay, designed and illustrated by SumLilThings.

The keychain doubles as a washi card and cutter. The removable disc is the part you can take out, swap, or use separately. This guide focuses on storing and swapping that disc safely, plus a few practical tips for using it as a washi tool.

Key Facts About the Disc and Case

How to Remove the Disc

The disc is designed to be removable, but the catalog doesn't specify a particular removal method. Based on the construction (three pieces of acrylic), here's a safe approach.

  1. Hold the keychain outer case: Grip the outer acrylic case firmly but gently. Avoid squeezing the disc itself, as acrylic can scratch.
  2. Slide the disc out: The disc spins freely inside the case, so you can rotate it to align with the opening. Gently push or tilt the disc out through the gap. Do not force it; if it resists, check that it's aligned with the case opening.
  3. Store the disc safely: Place the disc in a soft pouch or a compartment where it won't rub against hard surfaces. The holographic overlay is delicate and can scratch.

How to Swap the Disc

Swapping the disc means replacing the original disc with another disc of a similar size. Since the catalog only confirms one disc design, swapping is possible if you have a compatible disc.

  1. Check disc size: The outer case is about 3 inches. Any replacement disc must be slightly smaller than that to fit and spin freely. Measure the diameter of the replacement disc.
  2. Remove the original disc: Follow the removal steps above. Keep the original disc safe if you want to swap back later.
  3. Insert the new disc: Align the new disc with the opening of the outer case. Slide it in gently. It should spin freely without catching. If it doesn't, the disc may be too large or too thick.

Using the Disc as a Washi Card and Cutter

The disc is designed to be used as a washi card and cutter. The catalog says it's "single-sided print acrylic with holographic overlay," which means one side has the design and the other is plain. When using it as a washi cutter, place the disc on top of washi tape and press down to cut. The acrylic edge is sharp enough to cut through tape, but treat it carefully to avoid scratches.

Because the disc is removable, you can use it separately from the keychain. This makes it a portable washi cutter that fits in a pencil case or pocket. Just remember to store it in a protective sleeve when not in use.

What the Catalog Doesn't Settle

The catalog doesn't specify the thickness of the disc or the exact gap in the outer case. This means you should test any replacement disc carefully before committing to a swap. It also doesn't mention whether the disc can be used with washi tape rolls of a specific width, so start with a small strip to confirm it cuts cleanly.

Colors may differ on monitor screens due to different settings, so the actual holographic effect may vary slightly from what you see online.

Related Articles

Customer Service
Home
Products
Cart
Profile